• 0 Posts
  • 4 Comments
Joined 3 years ago
cake
Cake day: June 17th, 2023

help-circle


  • Most likely the module, if it is a separate module and not part of the SoC of the infotainment system or whatever, works over CAN bus and the car will throw errors when it doesn’t detect its presence, or doesn’t detect the SIM card. Might even refuse to start if that module is missing. Might be possible to remove the antenna so the car thinks it’s just outside of the service area, but if it’s built into the PCB and the PCB is cast into resin/silicone for waterproofing, even this might be extremely difficult. Probably the module is also serialized* so replacing it with a “dummy” module or a module from a junkyard won’t spoof the system, either.

    *Manufacturers have been serializing even airbags for years, making replacing a faulty one with one from a junkyard impossible.


  • Shurimal@kbin.socialtoSelfhosted@lemmy.world•Tailscale help needed
    link
    fedilink
    arrow-up
    2
    arrow-down
    1
    ·
    3 years ago

    Set up Tailscale as exit node to your local network.

    Make sure that your network is not standard 192.168.0.x or 192.168.1.x IP address range, but something like 192.168.101.x so you don’t have IP conflicts when accessing from a friend’s house or workplace wifi.

    Set up Nginx to redirect your home server IP (eg. 192.168.101.5) to the correct port for your dashboard like Heimdall or Dashy.

    That’s it. Works like a charm for me if set up this way.

    Addendum: if you have trouble on Android, disable MagicDNS.