• 0 Posts
  • 23 Comments
Joined 10 months ago
cake
Cake day: January 28th, 2026

help-circle
  • I have it on all my home networking equipment, my router and my APs, and a wifi bridge for my SBCs. My experience has been that it is just as simple as the proprietary firmware, and more robust. The catch is that I chose each piece of equipment knowing that I would flash custom firmware onto it, so they were ones the OWRT wiki showed as being simple to flash.

    Which model TP-Link are you going with? The page for whichever model on the OpenWRT wiki should tell you whether it’s easy or difficult to flash and revert


  • Yeah, it definitely makes browsing a lot more hands-on, and the lack of cross-device syncing means that you’re constantly duplicating work. There’s probably a way to export settings and diff/patch and sync the settings files for each device, but I just haven’t bothered; seems like a lot of time investment to automate something that takes me seconds to do manually.

    On the other hand, there were two big shifts for me after I started using it. One was when I got the sites I use frequently all set up after a few weeks, it became a lot smoother sailing after that. The other was when I finally took the minute to find the setting to default (temporarily) allow, but only for the current domain (after like a year or two on default deny everything).

    It’s now rare that I visit sites where I feel like I’m missing out without the added scripts. The only times that has really changed is when everything started implementing anti-scraper measures, and sites along the high seas that have trouble streaming videos from other servers.



  • They can run 100’s of scripts on a single page from every identity broker. They employ the best data scientists, to figure out every possible way.

    The impact of this is probably greatly reduced by anti-JS measures like NoScript. Some sites probably still bundle fingerprinting code into their own scripts, but the really big players contract that out to companies whose entire purpose is data-harvesting, and that’s easily defeated by denying scripts from outside domains





  • Depends on how much privacy you need and how much tinkering to get things to work that you’re willing to put up with.

    In general, using a variety of services will be more private than going with a single entity like Proton.

    Bitwarden is self-hostable, which makes it potentially more private than Protonpass… assuming you actually set up the self-hosting.

    Signal isn’t a good long-term plan, as it’s entirely hosted in the US. I don’t think there are currently any known compromises to the encryption model, but iirc the company can see all your communications metadata (which means the government could potentially as well). I don’t mind it for talking with friends, but I would recommend against it for extreme privacy needs (e.g. the government starts getting overzealous with who it counts as enemies of the state, and you or your friends become targets).



  • Proxies and VPNs seem like the most obvious targets. They mostly prey on people who don’t understand the technical workings thereof (had my mom ask if she needed to get a VPN bc firefox opened on ad for theirs, claiming it enhanced privacy), and serve little benefit to people who are doing the kind of illegal activities that make governments take notice. They serve as a single point of compromise for anyone, and they work worldwide so that all your traffic can be monitored even when you’re on a different ISP/in a different country. It’s like the perfect MITM, and people are even willing to pay to have themselves monitored.

    The truth is that at best they benefit people who only don’t want their network-provider watching, but don’t care who else may be. It’s the perfect setup for a 3-letter agency to just sit and monitor everything anyone does, waiting for someone who’s just a little too careless to access illegal content thinking they’re anonymous.




  • Just looked at Session, and holy shit is that a massive downside…

    From their own whitepaper:

    Through the integration of a blockchain network, Session adds a financial requirement for anyone wishing to host a server on the network, and thus participate in Session’s message storage and routing architecture.

    So you have to pay to self-host, and that’s somehow an upside???

    This staking system provides a defence against Sybil attacks by limiting attackers based on the amount of financial resources they have available.

    Which is a fine explanation in a world where everyone has a relatively equal amount of wealth. This is the epitome of dunning-kruger economics: a little knowledge is a dangerous thing.

    Firstly, the need for attackers to buy or control Session Tokens to run Session Nodes creates a market feedback loop which increases the cost of acquiring sufficient tokens to run large portions of the network. That is, as the attacker buys or acquires more tokens and stakes them, removing them from the circulating supply, the supply of the Session Token is decreased while the demand from the attacker must be sustained. This causes the price of any remaining Session Tokens to increase, creating an increasing price feedback loop which correlates with the scale of the attack

    So the more nodes a single entity holds, the harder it becomes for other entities to buy nodes and break the monopoly? Did you take 3 seconds to think this through???

    Secondly, the staking system binds an attacker to their stake, meaning if they are found to be performing active attacks, the underlying value of their stake is likely to decline as users lose trust in the protocol, or could be slashed by the network, increasing the sunk cost for the attacker.

    “Assuming every user is a perfectly rational actor, malicious actors would be shunned. This is somehow due to the economic incentive, and not just how humans operate when they’re assumed to be perfectly rational.”

    Also: malicious actors when they find out they might lose their money if they get caught: “welp, I better not do that then. Thanks laissez-faire capitalism!”

    Jesus christ fucked on a pike, these dipshits really drank the crypto kool-aid, huh?



  • If you really want to save some space, you can save a lot by opting to use command-line programs instead of the GUIs that basically just act as front-ends for the command-line programs. E.g. most FOSS audio converters just use ffmpeg behind the scenes, so really they’re a lot of extra libraries and such just to give you a graphical means of building up the CLI command. Same goes for videos. Same for images, though a lot of those might use imagemagick instead (even though ffmpeg also does images).

    That being said, I use VLC for converting videos and audio files. I honestly can’t tell the difference between uncompressed (e.g. .wav), lossless (e.g. .flac or .ape), and high-bitrate lossy like mp3 v0 or mp3 320. Heck, I can’t even tell the difference between the aforementioned and mid-bitrate lossy audio like mp3 192 or Vorbis (the .ogg format) 192.

    Quality is of course dependent on how sensitive the listener’s ears are, and how quality the equipment you’re listening with is. You’ll want to run some test conversions youraelf before committing to any specific format.

    If your files are already in lossy formats, then you really don’t have much choice for compression, outside of bundling them all together in a tarball and compressing them with something like gz or zstd. This is only good for storing them, if you try to listen to them, your system will have to extract them, and that either takes time before it plays, or causes stuttering while it plays.




  • GaumBeist@lemmy.mltoOpen Source@lemmy.ml•An open source repairable printer.
    link
    fedilink
    arrow-up
    74
    arrow-down
    4
    ·
    edit-2
    9 months ago

    >inkjet

    LED printers have been around for fucking ever, and the average person doesn’t need the graphic fidelity that only an overpriced pigment soup, which goes bad in a month, can supply.

    Oh, and literally every part of a toner-based printer is easier to replace/repair… so why would a printer designed around repairability and upgradability use ink???

    Edit’ And I almost forgot: toner is cheaper per page than ink! Whyyy???



  • A few answers say “they aren’t private by design,” but don’t really go into the “why.” There’s the obvious “it’s an electronic tracking device, duh” reason, but there’s also a more nuanced reason:

    Airtags are able to be picked up almost anywhere because they connect to the nearest bluetooth-enabled Apple device, and then send location info across the internet to you. Without this functionality (the ability of any and every Apple device to locate it), they wouldn’t have any way to send their location back to the owner.

    Your best “privacy respecting” alternatives are something that uses meshtastic (and hoping there’s enough repeaters near you), something that uses cellular data and GPS (which is about as privacy-respecting as Airtags are), or just a key finder/beeper (which only works within a small radius)