There was some drama after one of Mullvad’s cofounders was outed for donating considerable sums of money to right wing organizations. It’s fallen out of favour as the default recommendation as a result
- 0 Posts
- 25 Comments
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Can you please tell me all about your DIY router?English
1·1 month agoI have 2.5G N100 and it works wonderfully at that rate. I think higher might be tough, but it still pushes that throughput even with IPS enabled in OPNsense.
The complained about heat is right though. I stuck a noctua fan on the top and it’s been happy since. It lives my closet, so noise isn’t a facto anyways
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Issues setting my first Home lab as a total total beginner (no programming, coding, etc. related knowledge)English
3·3 months agoSeeing as you’re running this from a laptop, was this speed test performed on a wired connection?
For self-hosting services you want to access remotely, you may find this to be exceptionally limiting. It may not be too bad if you live alone, and you’re sure no one else is using your network when you’re gone, but other devices performing routine updates may be enough to disrupt your outgoing connection. Additionally, that ping would indicate the speed test is being run from somewhere quite far from you. Latency that bad isn’t a great time for applications that might expect a consistent response time.
As for streaming those FLACs from your server while at home: You’re not going to struggle loading these files, because your local network is likely running at least at gigabit speeds. That speed test isn’t representative of your network as a whole, but just your internet connection.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•What's your favourite thing to self host and why?English
3·4 months agoDoesn’t feedbin have a self-hostable Docker?
They didn’t give up, they pushed it back 6 months to wait out the shitstorm.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Why I moved my Plex library to Jellyfin after 14 yearsEnglish
2·5 months agoThat seems like a rather arrogant tone to take. Reverse proxies are complicated. Easy to set up, but challenging to configure depending on what your needs are. Not everyone wants a homelab.
Everyone’s journey starts somewhere and sometimes people’s needs just don’t extend beyond the easier choices available.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Question: What are some alternatives to a Raspberry Pi good for a small home server?English
2·6 months agoSame, this seems incorrect
Flatfire@lemmy.cato
Selfhosted@lemmy.world•How would you expose Jellyfin securely without a vpn?English
1·6 months agoI was mostly making the comment in jest. I do rename, but my folder structures, as someone who downloads everything manually based on what I want to watch rather than doing the automated *arr stuff leaves it in directories only I consider sensible.
I have Jellyfin behind a reverse proxy that lives in a DMZ and a WAF to go with it. I’m sure there’s still room for watching an unauthenticated stream because I forgot to rename a folder somewhere, but it’s not exactly an attack vector I care about. I’m more concerned about DDoS or impersonation attacks, which I also attempt to mitigate via an LDAP implementation behind the scenes.
It’s not perfect, but it’s the best effort I can make at the moment.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•How would you expose Jellyfin securely without a vpn?English
4·6 months agoJokes on them, my paths are a shitshow and I can’t be bothered to organize them properly
Flatfire@lemmy.cato
Selfhosted@lemmy.world•How would you expose Jellyfin securely without a vpn?English
3·6 months agoYou’ve got a couple benefits. If you have a domain name, and aren’t advertising it publicly, then you can use the reverse proxy to point that domain to a non-standard port that Jellyfin runs on.
Security through obscurity is not good security, but it does prevent the majority of port scanning attacks. You can also use fail2ban on the reverse proxy side to try and mitigate some attacks.
Flatfire@lemmy.cato
Open Source@lemmy.ml•France dumps Zoom and Teams as Europe seeks digital autonomy from the US
3·10 months agoI wouldn’t expect that to change. Their primary intention is in building out a suite of tools for use within their own government institutions, rather than a wider audience. If you’re interested in self hosting though, the Github documentation is pretty much all in English
Flatfire@lemmy.cato
Open Source@lemmy.ml•France dumps Zoom and Teams as Europe seeks digital autonomy from the US
4·10 months ago“Visio” is their internally developed video conferencing platform. It’s part of their “La Suite Numerique” suite of software, most of which is open source in large capacity
Flatfire@lemmy.cato
Privacy@lemmy.ml•Opening the door: Making self-hosting friendly for newcomers
16·1 year agoA couple points:
- Your website does not properly convey the technical context of Safebox. Docker is a complex platform, and asking someone to install it point blank on any OS, while also championing ease-of-access feels at odds here.
- There is a severe lack of documentation about the tool. Discord is not an appropriate means to find these documents if they exist. It is rarely okay as a support channel.
- I saw your post from a few days ago, but it was framed as a question about about gatekeeping specifically. The post also advertised Safebox. Given that the post no longer exists (but the comments sure do), I’m inclined to think you didn’t get quite the answer you were looking for.
I dove into self-hosting several years ago and ultimately I think I found the experience quite welcoming. I also don’t know that Safebox has a lot to offer over well-established alternatives these days like Unraid or TrueNAS, which have large user-bases and a depth of support articles to help admins better understand what they’re doing and how to do it. It’s true that not everyone would want to do this as a hobby. No one wants their services to break, or their data to be lost, and more tools that make it easier to prevent these scenarios are helpful. With that in mind, I am not left with a clear understanding of how Safebox is meant to provide safeguards here.
I used the word “admin” in the previous paragraph for good reason. Self-hosting makes you the administrator, and it means that you, the administrator, have the power to make mistakes. My recommendation is not to talk down to your users. Someone interested in self-hosting should be aware of the potential security implications of what they’re taking on, alongside the risk to their data and that breaking changes are something they can and will make along the way. If you really want to make self-hosting accessible, then the documentation for your tool needs to be accessible too.
Safebox runs on Linux, macOS, and Windows, supports both x86 and ARM64 (including Raspberry Pi, Banana Pi, and others), and handles domain/subdomain setup, Let’s Encrypt certificates, DNS configuration, reverse proxy (nginx), and also offers WireGuard-based remote access.
A user should be able to learn why these elements are important and how they work together. Talk about the limitations of running it on a raspberry pi vs a workstations or server. What’s a reverse proxy? Is WireGuard good? This doesn’t mean the average person needs to know how to configure detailed permissions or application configs, and if the goal is to provide a repository of pre-hardened Docker configs for use then that’s cool too, but there should never be a barrier to the information itself. Especially as it is relevant to the tool you’ve built.
I think that fundamentally, you’ve built a good tool that simplifies things someone who is already familiar with its components, and where it needs to improve is by expanding to help new users familiarize themselves. Education is as big a part of accessibility as the ease-of-setup.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Has the "recertified" hdd market dried up?English
5·1 year agoIn my experience, they come in waves. They come either as data centres seek to replace or renew existing drives, but as a result, there aren’t as many lower capacity drives available. Lately, I’ve only seen 10+TB drives under a recertified banner, though you can find lower capacity drives that are “refurbished” instead. They will have the power-on hours to match though, as these are the refuse from those sorts of drive replacements.
You may find better luck with local used marketplaces if you only need cheap storage. Otherwise, they do seem less common if you don’t need large capacity drives.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Using Termux to create a tiny selfhosted hidden chat server with E2EE.English
9·1 year agoEchoing the sentiment of the other commenter. A link would be great!
Flatfire@lemmy.cato
Privacy@lemmy.ml•How to protect my identity while running an online store?
5·1 year agoMost domain registrars make whois info private by default these days. It’s typically just a toggle. Same with DNSSEC
Flatfire@lemmy.cato
Open Source@lemmy.ml•KDE's Android TV alternative, Plasma Bigscreen, rises from the dead with a better UI
19·1 year agoThat’s exciting. It looks very clean, but until it has the tv remote support aspect I think it’ll wait
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Friendly reminder that Tailscale is VC-funded and driving towards IPOEnglish
3·1 year agoAh, I see where I got confused. Yeah, CGNAT isn’t very common around here. I don’t think I’ve ever run into an ISP that uses it. I can see how that complicates things.
Flatfire@lemmy.cato
Selfhosted@lemmy.world•Friendly reminder that Tailscale is VC-funded and driving towards IPOEnglish
52·1 year agoYou really don’t though. I use wireguard myself under the same scenario without issue. You just need to use some form of dynamic DNS to mitigate the potentially changing IP. Even if you’re using Tailscale you’ll still need to have something running a service all the time anyways, so may as well skip the proxy.
I’m not sure. Mullvad is still a good product, but what it funds is not.
If I’m entirely honest, I mostly see VPN services as a predatory market, inflated by their own marketing campaigns about the risk of personal privacy. There are some products who are true to their word, like Mullvad, but most are looking for a quick buck from the average user who might forget they have a running subscription if they keep the cost low enough.
Frankly, after seeing what’s happened with Proton and Mullvad, I’m not inclined to believe anyone in this market amounts to more than a paranoid libertarian at best.