AmbitiousProcess (they/them)

  • 0 Posts
  • 59 Comments
Joined 1 year ago
cake
Cake day: June 6th, 2025

help-circle

  • For the USB one I don’t think it even has the ability to use WiFi in any way, but it seems you might need to install their drivers to then locally be able to set the label size within a system dialog. In my experience, at least for the wireless one, it doesn’t necessarily require its own drivers to work, as it works with Windows’ built-in printer drivers, and worked well enough for me on Fedora Linux. (But you might have issues with stuff printing in the wrong orientation and have to account for that by rotating your files before printing)

    For the wireless one, I think you’ll need at least some form of network no matter what, at least for setup. (I do want to clarify though that you can still use the wireless one with a wired cable to send files to print to it, and as far as I can tell that works even if WiFi is off) They really want you to use the app, but since it really is just another way to access the web UI, they do also just have a guide on how to do it without the app.

    I set mine up on my WiFi network that does have internet access, but theoretically since the UI is on a local IP it should be able to work on an isolated VLAN or something similar where no actual link to the Internet exists and it’s just a LAN, but I have no clue if it tries to connect to a server anywhere on startup before allowing anything else to happen, so your mileage may vary. It’s unfortunately not something I’ve tested for.

    It also has an option to check for updates, I presume to fix any bugs or future potential exploits, but I’ve never seen my printer update once in nearly a year of owning it. (As far as I can tell this setting can’t be disabled, all you can change is if it prints a label to tell you when it updates)

    Regardless, as mentioned previously, it should be able to function in terms of just the printing itself with just a cable and no access to the internet afterwards, so you could always set it up on WiFi, add all the page sizes you want, then disconnect it from your network and only use it over USB and it should work fine :)

    You can change its IPv4 and IPv6 address/netmask/gateway/prefix length, DNS servers, and hostname in settings, install a custom TLS certificate, etc if any of that helps.

    Also, you can change the default print settings, which I personally very much recommend. Depending on what you’re printing, you might want to increase the print quality or darkness, particularly if you print a lot of labels in succession that might otherwise start printing a little more faded on the lighter settings.

    That’s all the info I can think of that would probably be relevant, but if you’ve got any more questions that I somehow missed I’m happy to answer them too lmao


  • It’s a Rollo! (refurbished)

    I have the white wireless-capable one, but the USB-only model should theoretically operate the same in all other respects.

    To manage the wireless one you use the app, or just go to the web URL for the management portal… because all the app does is just redirect you to that exact URL in-app 💀

    I know a lot of cheaper models do still work well, but Rollo is just a much larger, more well known brand that also just has a lot more troubleshooting info behind it. (not to mention better printer driver compatibility)

    Definitely don’t buy the overpriced official Rollo labels, though. They’re no better than any other thermal labels on the market!





  • Isn’t that no different than the millions of open source projects that have few authors, little interest and are abandoned for the next shiny thing?

    The end result isn’t inherently different, but the basis is.

    Someone who programs a FOSS project with their own programming skill is, by definition, more invested, and more willing to spend time making that project exist. Someone who is mostly just willing to tell the LLM to do it for them is, by definition, less invested in the project.

    It is more likely that someone less invested in a project will abandon it.

    At least in my mind with the current state of LLMs, if there is an open source project that you want to update for yourself, you should be able to do that pretty easily.

    Sure, that’s possible, but the main concern is that most people either don’t have access to more capable models (which will otherwise require them spending money for their software to keep getting things like security patches, vs projects that have maintainers that are more invested in them that aren’t abandoned in the first place which are effectively free unless you choose to donate), and you get forks in development path. It might fit one user’s goals, but now you have, say, 100 people who all tried reviving abandonware with their own LLMs, all with different features, security, import/export mechanisms, etc.

    That’s not to say it’s bad that people can use LLMs to “revive” abandonware, but I don’t think we should be encouraging people to create and publish software that’s highly likely to be abandoned in the first place.


  • This is the main reason why vibe coding, even if it produces good code, is still a major problem. It encourages people with the goal of making software, but without the actual will and motivation to keep supporting that software to pump out software and publish it.

    It’s like all the faceless AI-automated YouTube channels we have now. It’s not that these people had no way of doing it before, it’s just that it’s easy and might make them some money, or make them feel like they accomplished something until they get bored and move on.

    There’s something to be said for convenient and easy to use things, but they’re a double edged sword, because they also directly target people with the least emotional investment to use them, as a side effect of that convenience.



  • I am curious what my fellow lemmings would recommend in place of proton.

    I’d recommend Tuta. (I use Proton myself, but still have a Tuta account as well)

    They’ve got mail, calendar, and Drive coming soon. A good little selection of apps without too much, and their prices are quite reasonable. I will say though, you get less email aliases than Proton, no VPN bundled in, and their user interface is… simplistic, shall we say.

    But, if all you really care about is just having an email and calendar, and soon having some basic cloud storage too, their prices are very reasonable and they haven’t had any major controversy I’ve heard of. (other than some people complaining about them allowing LLM-generated code in their repos, which I personally believe is fine as long as it’s reviewed by a human, who actually understands the commit, before approving it)




  • it was never as simple as “pick file, send file”.

    Not really what Syncthing’s for. Localsend is definitely much better suited for that. (though there is the option on the unofficial Syncthing Android app to use the Android share feature to “save to Syncthing”, then pick which folder you want Syncthing to save it to before syncing it to whatever devices that folder is synced with, though again, not really made for that as a core feature, Localsend is better for that)

    Syncthing is more for if you just want a folder on one device to be replicated to another device. For example, my Camera folder on my phone syncs to my PC so I always have a second copy of all my photos by default.





  • Most can, but they still rely on your phone getting an internet connection later, on your phone being trusted to send data over itself, and of course still require your phone to actually be charged. (Can change if it’s a regular card depending on the issuer though)

    Also, if you’re just generally curious about stuff related to offline payments, there’s actually a major security hole that Visa refuses to fix, which allows a device to pretend to be an offline-only card reader, then charge any value to someone’s card, and get away with it, even if their device is locked.

    Not really a point in favor of my original argument though, since CBDC infrastructure would require replacing or updating all the readers anyways, and implementing the standards to prevent such an attack, like MasterCard has used for a while now.


  • In 2026, when is your phone running out of battery

    Not too regularly to me, but it happens frequently to most of my friends, and some street performers I know who don’t always have good access to a power outlet, or the money for a portable charger.

    …or losing wifi?

    I and many other people regularly experience complete cell dropouts when at my local grocery store. No service. (Works fine outside and slightly down the block) We are in a city, not the middle of nowhere either.

    There have also been internet dropouts for my local store’s machines, meaning people paying with cash could go instantly, whereas people who only had cards or phone payments had to wait in a massive line since every transaction took 2 minutes to go through.

    You can also just get a crypto card if your worried about your phone being unreliable.

    Sure, but at that point I could just get literally any card. I was only commenting on CBDCs, though I suppose the same critiques could apply to direct crypto transfers.

    At the end of the day, CBDCs tend to rely on phones to work, and thus can’t work if your phone doesn’t, unlike cards, and especially unlike cash. (given cash relies on nothing but you and the person you’re transacting with believing the cash is real, vs phone payments or even just cards still requiring an internet connection at some point, and power to the reader, plus permission from an external gatekeeper as the cherry on top)