Hello selfhosters!
I have what is hopefully a simple ask. I am looking for some outdoor cameras for my sister, who is not at all tech savvy. I am, to an extent, and I’d like to get her set up with a small, remotely-manageable system to view and record the outside of her home. I’d wager there’s a plethora of selfhost software that can be run on a number of systems (I’m thinking something cheap like a Raspberry Pi), to connect to an external HDD for camera storage.
I’m also looking for camera suggestions for this purpose. Wi-Fi cameras are ideal, since we don’t have the means to run ethernet for PoE.
Thank you for your time, and I hope you all have a wonderful week :)
Commenting so I can remember to check back for any suggestions. I’ve basically run into this problem:

Look into Wyze cameras and Thingino firmware. I just found out about the latter, went ahead and bought a Wyze Cam v3 and flashed it with Thingino. Works well in HA. Haven’t started on Frigate yet, but that’s in the works now, too.
If another kind soul comes through with a good suggestion, I’ll try to remember to tag you! There’s got to be something out there.
Anything that can be flashed with Thingino firmware. Give that a shot.
I have no ties to this project - I just think it’s really cool.
If this does what it says it’ll do, this is ABSOLUTELY the answer
I mean, the one Wyze Cam v3 I have with it seems to have been working well over the last 36 hours.
I did a wyze cam 3 yesterday too lol.
So far so good!
Wow that’s an awesome project! Thanks for sharing, now I can get a camera that’s inexpensive, has everything I want and doesn’t require malware to be installed on my phone/network!
That’s a real hero move, and I appreciate it.
Well, there was supposed to be the new PineCam from Pine64, but apparently it was never released?
I think I’m just gonna get some Pi Zeros + cameras and just roll my own. Probably use the NoIR versions and some cheap IR illuminators. Feed those into Zoneminder.
Bonus points if I can find some old CCTV cameras, gut them, and fit the pi camera to those optics.
Last I looked into this Frigate was the most robust path to take, they recommend cameras that are about $50-$100 each but in my playing around I connected a Yi camera ($10) with custom firmware.
That said it was all a bit over my head and I had trouble connecting it to home assistant and gave up
I would love a follow up post with whatever setup you go with!
I have a frigate setup. I run it through Docker and I even have the Coral AI processor chip hooked up. Which is pretty neat, runs local pattern recognition for people, annimals, etc. I use generic IP cams on their own network. I think pretty much anything that supports RTSP would work. Then hooked up to HA via MQTT, again all in docker. With the coral, I only get notifications if it actually detects a person. The false positives are extremely rare. And I use Tailscale for access from outside the LAN
That’s cool, so with the AI chip it can recognize individuals people and pets? Just wondering how you prevent it from alerting you for well, you.
Unfortunately not quite so good. Maybe there exists a model that can do facial recognition. But the model I have loaded on mine just spits out “dog”, or “person”, or “car”. The false-positives I was referring to it not having, is what you’d typically get with a pixel-based motion detection camera. Where if it sees a leaf on a tree move, it alerts you.
Mine, at least that leaf needs to look convincingly like a person.
You can read more about the Coral at https://coral.ai/models/
Ah ok thanks, so just to be clear, when you come home it will still “alert” you to an “intruder” (until your GPS updates presumably).
You could set it up like that yes, I suppose it would be bad opsec to give away exactly how I set mine up. But HA certainly has the ability to be informed when your phone comes home and change what alerts are sent out based on that
Hmm my phone always takes a few minutes to update that I’m home.
I have thought about different ways to do that. Both iOS and android have the ability to run scripts upon certain triggers such as joining a certain Wi-Fi network. (On iOS the Shortcuts app can do this). I’ve thought about using that to post to the already running mqtt broker and using that to update my system. Or I’ve thought about just snooping all the nearby Wi-Fi clients to my server, and if it detects my phone, do something similar.
Or I suppose you could turn it around, before the system decides it has an intruder, check to see if your phone is in fact at home via some method. Either scanning for it on Wi-Fi or some other way.
+1 for frigate in a docker container. You can run it on a pi. If you want object/person detection (which helps a lot in alerting/notfiying), then a coral usb accelerator is also a good add on to the pi. Lastly tailscale for remote management. Camera wise I prefer amcrest, but reolink are also good. Wifi can be finicky, but will work as long as you have signal. You will still likely need a power source since battery cameras don’t last long at all.
I will say, even WiFi cameras need power run to them, and I’m glad my days are over for running around on a ladder every week changing out the batteries for my mom. Running PoE makes life easier in the long run.
Even the camera that came with its own small solar panel sucked. Camera would drain battery faster then it would charge, shutdown when low, and slowly recharge back up, but you still need to climb up to turn it back on.
Wifi cameras don’t run exclusively on battery. Most run on 5V from a USB wall wart.
There is some great resources here
https://ipcamtalk.com/wiki/ip-cam-talk-cliff-notes/
Unfortunately the average security enthusiast is a frothing conservative but they tend to keep their politics to a few dedicated threads, they are very helpful other than that.
If you want good performance in the dark keep your sensor size in the green on this chard

I currently run frigate on my server and just add cameras I find with the right sensor ratio for a good price. I have a couple of older 2mp wiz nets that would have been $500-700 new that I got for $70 each that see outside at night great.
Just a quick comment that you might want to check out scrypted and its ability to manage a collection of cameras.
Does she have regular 12 volt doorbell?
Get her wired doorbell camera this way no batteri s needed. And a large sd card.
I use tapo and it’s fine.I hadn’t heard of Tapo, and while TP-Link scares me a little, it looks like it could also be integrated into Home Assistant for viewing. Does the camera record over the first-recorded data when the SD Card gets full? Do you use the TP-Link/Tapo app for local management? Thanks for your response.
Home Assistant for viewing
Heads up: by default, HA does not show real-time, full-framerate video - just a snapshot that updates every 10 seconds or whatever. As with all things open source, there is a way to fix it, but you have to faff around. I haven’t bothered yet, but it’s on my list.
Thanks for this info.
I have a couple Tapo cameras set up with HA, I had to use the tapo app initially to set up but once they’re set up you can ditch it and run the system entirely locally. I saw someone had a way to configure them locally too, but it wasn’t simple enough for me to bother and I was fine with the one time step.
I wouldn’t bother with a home assistant if your sister is non technical.
I use both xeoma with raw rtsp stream and tapo app. any app that uses rtsp should workJust get her SD card and use a tapo app.
Dahua where top of the class, unfortunately hard to find today. I run like 8 of them.
Reolink maybe, but own one and not really at par with Dahua.
If anybody knows who is the successor to dahua, let me know.
Chaper than that, sorry, it’s going to be shit.
Dahua is still a top manufacturer, but does not focus on selling to individual consumers.
In the US, you will find Dahua cameras being sold most often by Amcrest and Lorex.
Wyze Cam v3 or Wyze Floodlight Cam v1 (both rated IP65) running open-source Thingino firmware. These can be used by pretty much any NVR software running on a cheap off-lease office PC (Dell Optiplex or similar).
I’m in the process of figuring out my own NVR solution with Frigate. I just bought a Wyze Cam v3 this weekend and immediately flashed it with Thingino as a proof of concept, mostly for myself. There’s lots of functionality, including the fact that it can still record locally to SD; all I need to do now is figure out how to replicate most of Ring’s functionality within Frigate and HA to meet the “wife approval factor”. It helps that she’s already 100% onboard with HA, so that’s pretty nice.
Home Assistant already offers remote access through Nabu Casa (everyone using HA really should consider subscribing, it all goes towards financing HA development), and with the Frigate integration, the cameras can be remotely managed as well (I think… I should check that).
I built this system for my mother with an old business pc running frigate. I used an old wifi router with ap mode available in the firmware that is only for the cameras. It’s a simple way to make sure the cameras won’t have internet access without relying on whatever router they may have. I added a second Ethernet port to the business PC because I had the parts, but for one or two cams you could theoretically do all over wifi. Install wireguard so you can manage it remotely. Then decide if you want to bother forwarding the ports and getting a domain setup, or if local only viewing is good enough.
For cameras, I used these amcrest ASH22-W which are good enough for the price. 1080p for $33
https://www.ebay.com/itm/314660333877
One thing to remember with these cameras- mounting them high gives you a bigger field of view, wipes out any possibilities of identification. The frigate models also don’t do as well. Doorbell cameras are better for that.
a simple ask
Remember, when you’re off the car lot, the word is ‘request’ or ‘question’.
In terms of software: Agent NVR is imho currently one of the easiest and most compatible camera software systems available for free. Runs on a pi,even though I would absolutely not recommend one
(Use a proper x64 SBC like the zimaboard. Makes a lot of things easier).
Camera wise Dahua, Hikvison and Foscam are far better than Reolink, imho, but they most definitely need a separate network or a block so they don’t access the internet.

Also known as “the iron triangle”.










